Common problems of garden tools
1. Are you a manufacturer?
Answer: Yes, we are the manufacturer.
2. Can I use our own logo or design to make stickers and types?
Answer: Of course you can.
3. How do we guarantee the quality?
It is always a pre-production sample before mass production;
Always perform a final inspection before shipment;
4. What can you buy from us?
Lawn trimmers, hedge trimmers, electric pruning shears, and many other garden tools.
5. Why buy from us instead of other suppliers?
After three years of outstanding results, more than 30 national patents, to ensure the core of the product, we continue to strive for excellence.
6. What services can we provide?
Accepted delivery terms: FOB;
Accepted payment currency: U.S. dollars;
Accepted payment types: T/T, L/C, Western Union;
Language: English, Chinese
What are the maintenance tools for greening?
Gardening tools, including garden scissors, flower tools (garden flower tools, small flower tools), etc. Garden tools mainly include lawn trimmers, brush cutters, hedge trimmers, chainsaws, water pumps, punchers, drafting machines, sprayers, and various garden tools.
What do hedge shears do?
Hedge shears, also called hedge shears, are a kind of gardening tool, mainly used for pruning leaves with a larger area.
What are the types of lawn mowing machines?
Lawn machinery can be divided into three parts: bed construction machinery, lawn planting machinery, and lawn maintenance machinery.
What is the purpose of the brush cutter?
To be precise, it is called a knapsack mowing brush cutter. Generally, it is a two-stroke gasoline engine. It is mainly used for landscaping and autumn fire prevention, and for cutting wild shrubs.
What should I pay attention to when using the brush cutter?
The brush cutter is a two-stroke power. You should pay attention to three aspects of power, use, and cutting tools in use to ensure the normal use of the machine: 1. Engine: A. Qualified gasoline and oil, and ensure the mixing ratio (25:1) B. Regularly (25 hours) check and replace the air filter to check the spark plug; C. After each tank of oil work, you should rest for 10 minutes, and clean the loose gaskets of the machine after each work to ensure heat dissipation; D. When storing, it must be cleaned Body, let off the mixed fuel, burn the fuel in the vaporizer; remove the spark plug, add 1-2ml of two-stroke engine oil to the cylinder, pull the starter 2-3 times, and install the spark plug. 2. Transmission: Regularly (25 hours) add grease to the gearbox, and at the same time add grease to the joint between the upper part of the driveshaft and the clutch disc. 3. Knife: The length of the nylon cable head should be controlled <=15cm. When using the blade, the balance of the blade should be ensured, and the blade with vibration should not be used.
What are the benefits of using a lawnmower?
The advantage of a lawnmower is that it is convenient to mow the lawn and can cut all kinds of grass, which is its biggest advantage.
What is the working principle of the lawnmower?
Working principle: The motor is used as the supporting power. The power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the speed-regulated power to the grass kun through the gearbox, universal joint, etc. When the material to be processed enters between the upper and lower grass Kun, it is clamped It is held and fed into the cutting mechanism at a certain speed, shredded by a high-speed rotating cutter, and thrown out of the machine through the grass outlet.
How many pipes are used for watering flowers?
It is recommended to use three-point management, this watermark flow does not need to be too large.
Is it better to buy a soft or hard hose for watering the flowers?
Of course, the soft one is good. The soft one can squeeze the water out of the spray, without wasting water, and can be poured in all directions.
What are the material types of gardening gloves?
1. Leather, mainly pigskin, cowhide, sheepskin, artificial leather, and artificial leather.
2. Rubber, mainly rubber, natural latex, and nitrile rubber.
3. Cloths, mainly knitted fabrics, canvas, functional fabrics, and accessories.
4. Threads, mainly cotton yarn, nylon thread, high-elastic yarn, and low-elastic yarn.
What is the material of the hand shovel?
Using high-quality steel-manganese steel and centuries-old traditional craftsmanship, carefully crafted by experienced master craftsmen. Production specifications, quenching technical standards, tough shovel body, and hard shovel mouth.
What are the characteristics and functions of the vise?
The vise is composed of a pliers head and plier handle. The pliers head includes a jaw, a toothed edge, a knife-edge, and a guillotine. The material is chrome vanadium steel and carbon steel.
effect
①The tooth opening can be used to tighten or loosen the nut;
②The knife edge can be used to cut the rubber or plastic insulation layer of flexible wires, and can also be used to cut wires and iron wires;
③The guillotine can be used to cut hard metal wires such as electric wires and steel wires;
④The insulated plastic tube of the pliers can withstand voltage above 500V. With it, you can cut wires with electricity.
It is mostly used to lift nails or clip nails and iron wires.
What are the types of saws?
There are many kinds of saws. According to their main purposes, they can be divided into horizontal saws (used for sawing wood), jigsaws (mainly used for sawing wood along the grain of the wood), and digging saws (also called wire saws, mainly used for sawing). Curved shape); according to the size of the sawtooth, it can be divided into coarse saw tooth (suitable for sawing larger and thicker wood), medium saw tooth (suitable for sawing wood of general size and thickness) and fine saw tooth (suitable for more detailed saw Cut); According to its shape, there are frame saws and panel saws. Saws are divided into large saws, two-chain saws, small saws, fish maw saws, circular saws, hand saws, hacksaws, and knives saws. The maximum length is 3 to 4 meters.
